A device inspired by human lungs can split water into oxygen and hydrogen Agencja Fotograficzna Caro / Alamy
Human lungs move gas through a thin membrane, extracting oxygen and sending it into our blood stream. Now a device uses the same principle to power the reactions used for making hydrogen fuel.
Yi Cui at Stanford University and his colleagues set out to mimic聽human lungs to increase the efficiency of electrocatalysts, materials that increase the rate of chemical reactions used to produce hydrogen by splitting water.聽Improving the process could make better fuel cells, which are used to power hydrogen vehicles聽and could one day be聽used for powering everything from cell phones to cities.
Cui and his team made a 12-nanometer thick plastic film with tiny pores on one side which repel water.聽The other聽side is coated with gold and platinum nanoparticles that are聽involved in the chemical reactions. Then they rolled the film and sealed the edges to make a small pouch with the metal layer on the inside.
Advertisement
Splitting water
When they apply a voltage to water to split it into its constituent parts, the hydrogen and oxygen gases enter the lung-like apparatus and create energy as they pass through the conductive metals on the inside of the pouch.
Carbon-based films that are usually used in fuel cells can create bubbles during this process, which causes energy loss. But these new lung-like devices minimise bubbles because the small pores control the rate at which gas can pass through the membrane and the pressure inside.
Cui and his team found that their lung-like device was 32 per cent more efficient at converting energy than using the same membrane in a flat configuration. 鈥淭he geometry is important,” says Cui.
The material is stable over long periods, too. When the team ran the reaction through the lung-like architecture for 250 hours, it retained 97 per cent of its catalytic activity. A traditional carbon-based membrane decayed to 74 per cent of its activity over just 75 hours.
The next step is to set up a system with many of these small pouches, but it may not look like a lung. 鈥淭he lung has a branching structure, but we need to have an anode and cathode for each of these, and it鈥檚 not that efficient to have a lot of those close together. The lung taught us how to deliver the gas. We鈥檙e going to have to find another form to scale this up,鈥 says Cui.
Joule
Topics:
